Key Specifications
| Feature | Details |
|---|---|
| Accuracy Class | III (n = 3000) |
| A/D Conversion | 24-bit Σ-Δ converter |
| Input Sensitivity | ≥ 1.5 μV/e |
| Input Range | -20 mV to +20 mV |
| Load Cell Excitation | DC 5V, 85 mA |
| Load Cell Capacity | Supports up to 6 × 350Ω analog load cells |
| Display | 7-digit LED, 0.56-inch character height |
| Analog Output Options | 0–20 mA, 4–20 mA, 0–5 V, 0–10 V |
| Digital Interfaces | RS232 and RS485 (selectable), independent scoreboard port (current loop) |
| Data Update Rates | Selectable: 6.25, 12.5, 25, or 50 times per second |
| Calibration Methods | Supports multiple calibration methods, including fixed-point and arbitrary-point calibrations |
| Housing Material | Aluminum alloy, suitable for control cabinet installation |
| Power Supply | AC 220V |
Where it is used
A weighing indicator powers the load cells, reads their signal and shows the weight. This model suits platform, floor and bench scales. Browse digital & modbus weighing indicators or all weighing indicators.
Installation and calibration
After an indicator is fitted, the scale must be calibrated, and a trade scale verified and stamped. Our technicians install indicators and calibrate scales on site through our calibration and repair services. Request a quote.
Frequently asked questions
Most analogue load cells work with it. Tell us your load cell type and number of cells and we will confirm.
Yes, if the model has the output you need (for example RS232 or Bluetooth). Check the specifications or ask us.
Yes. We fit the indicator, calibrate the scale and support it across Kenya.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Recently Viewed Products
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.