Key Specifications
| Feature | Specification |
|---|---|
| Model | BS-200kg |
| Capacity | 200 kg |
| Minimum Division | 20 g |
| Maximum Overload Capacity | 300 kg (150% of rated capacity) |
| Ultimate Load | 600 kg (300% of rated capacity) |
| Accuracy Class | OIML R60 C1 (1000 divisions) and C3 (3000 divisions) |
| Combined Error | ≤ ±0.05% (C1), ≤ ±0.02% (C3) |
| Creep (30 min) | ≤ ±0.00625% Emax |
| Rated Output | 2 mV/V ±0.1% |
| Zero Balance | ≤ ±2% of rated output |
| Input Resistance | 351 Ω ±3 Ω |
| Output Resistance | 350 Ω ±3 Ω |
| Insulation Resistance | ≥ 500 MΩ |
| Excitation Voltage | Up to 15 V DC |
| Compensated Temperature Range | -10°C to +40°C |
| Operating Temperature Range | -40°C to +80°C |
| Material | Stainless Steel |
| Protection Class | IP68 (hermetically sealed) |
| Cable Length | 5 meters ±3% |
| Cable Diameter | 5 mm |
| Weight | 0.8 kg |
| Package Dimensions / Weight | 10 × 27 × 6 cm / 1.0 kg |
Where it is used
This load cell suits industrial platform and floor scales. It connects through a junction box to an analogue weighing indicator. Browse all load cells.
Fitting and calibration
Match the type, mounting, capacity, signal and accuracy class to the cell you are replacing. After a load cell change the scale must be recalibrated, and a trade scale re-verified and stamped. Our technicians fit load cells and recalibrate on site through our calibration and repair services. Request a quote.
Frequently asked questions
It is, if the type, mounting, capacity, signal (analogue) and accuracy class match. Send us the label details or a photo of your current cell and we will confirm.
Yes. The scale must be recalibrated, and a scale used for trade must be re-verified and stamped.
On a multi-cell scale you need a junction box and an analogue indicator. See our junction boxes and weighing indicators.
Yes. Our technicians fit load cells and recalibrate scales and weighbridges across Kenya.
