Skip to Content

ESIT HSCD Digital Load Cell (HCD-C40)

The ESIT HSCD (HCD-C40) is a high-capacity, compression-type digital load cell for truck weighbridges, railway scales, tank weighing and process weighing. Its steel alloy body is coated with corrosion-retardant paint, and the strain gauge area is welded under a stainless steel cover, giving IP68 protection (fully immersible). It is certified to OIML R60, resists side forces and has a thin, heavy-duty profile.

Each cell has a built-in 24-bit converter and reports over RS485 Modbus, so the indicator reads every cell individually. That makes fault-finding and corner adjustment on a weighbridge much faster.

0.00 KSh 0.00 KSh (Tax excluded)




Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days




Specifications

SpecificationValue
Capacities (Emax)25,000 kg and 125,000 kg
Accuracy class (OIML R60)C3 (3,000 intervals) / C4 (4,000 intervals)
Minimum verification intervalEmax/20,000 (C3) / Emax/24,570 (C4)
Combined error≤ ±0.02% (C3) / ≤ ±0.012% (C4)
Creep error over 30 min≤ ±0.0060% Emax (C3) / ≤ ±0.0055% Emax (C4)
Minimum load0% Emax
Maximum safe overload150% Emax
Maximum safe side load100% Emax
Ultimate load300% Emax
Deflection at Emax≤ 0.3 mm
Excitation voltage12–24 V
Excitation current50 mA
Output signal at nominal load200,000 counts
A/D converter24-bit sigma-delta, 1 or 200 Hz
Data interfaceSemi-duplex RS485, Modbus, 115,200 baud
Angle measurement error0.1°
Insulation voltage2,500 V
Compensated temperature range−10 to +40 °C
Operating temperature range−40 to +80 °C
MaterialSteel alloy, corrosion-retardant paint
Sealing (EN 60529)IP68
Weight22.5 kg
Package25 × 33 × 23 cm, 24.5 kg

Source: ESIT Elektronik HSCD datasheet.

Where it is used

High-capacity truck weighbridges, railway scales, silos and heavy tanks. It needs a digital indicator that supports ESIT digital load cells, such as the ESIT ECI Digital indicator. Browse all load cells and weighbridges.

Fitting and calibration

Replace like-for-like so the indicator recognises the cell. After a load cell change the weighbridge must be recalibrated and re-verified for trade. Our technicians do this on site through our calibration and repair services. Request a quote.

Frequently asked questions

25,000 kg and 125,000 kg, in accuracy classes C3 and C4.

Each cell reports its own reading over RS485 Modbus, so a faulty cell can be found quickly and corners adjusted digitally, without a trimming junction box.

Only with an indicator that supports ESIT digital load cells, such as the ESIT ECI Digital. Tell us your indicator model and we will check.

Yes. It is IP68 rated and fully immersible, suited to weighbridge pits that flood.

Recently Viewed Products

 
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.
Scalestech
Online
Hi there 👋

We're glad you're here. Let us know how we can assist you—we're ready to provide the best solutions for your needs!
Call us