TECHNICAL SPECIFICATIONS
| Specification | Value |
|---|---|
| Accuracy Class | III |
| A/D Conversion | 24-bit Σ-Δ |
| Conversion Speed | 80 Times/Sec |
| Input Signal Range | -19mV ~ +19mV |
| Input Sensitivity | ≥ 1µV/e |
| Load Cell Excitation | DC 5V |
| Load Cell Connection | 1–8 Load Cells (350Ω) |
| Display | 7-Digit LCD Display |
| Keyboard | 5 Soft-Touch Buttons |
| Relay Outputs | 3 (AC 220V, 0.5A) |
| Digital Inputs | 3 |
| Communication | RS232 / RS422 / RS485 |
| Scoreboard Interface | 20mA Current Loop |
| Analog Output | 4–20mA / 0–20mA, 0–5V / 0–10V (Optional) |
| Power Supply | AC 110–230V, 50/60Hz |
| Operating Temperature | 0°C ~ +40°C |
| Storage Temperature | -20°C ~ +50°C |
| Weight | Approx. 0.7kg |
Where it is used
Explosion-proof indicators are for areas with flammable gas, vapour or dust, such as fuel depots, chemical plants and solvent stores. Match all equipment to your site's hazardous-area zone. Browse explosion-proof (ex-proof) indicators or all weighing indicators.
Installation and calibration
After an indicator is fitted, the scale must be calibrated, and a trade scale verified and stamped. Our technicians install indicators and calibrate scales on site through our calibration and repair services. Request a quote.
Frequently asked questions
Yes. All weighing equipment in the hazardous zone must be suitable for it.
Match it to your site's hazardous-area zone classification. Tell us the zone and we will advise.
Yes. We fit the indicator, calibrate the scale and support it across Kenya.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Recently Viewed Products
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.